I recently installed CyanogenMod 7.1 on my Samsung Galaxy S i9000 and I have some problems now to get ADB on my Windows 7 64-bit computer to recognize the device. Get the latest owner's manuals, firmware and software updates for you Samsung devices in one easy-to-navigate location: the Samsung Download Center.

How To Flash Stock ROM Firmware On Samsung Galaxy S GT-I9000 1) To get started, and install it in your computer. Once done, download the stock firmware of your device and extract the zip file to get the “.tar.md5” file as shown below. 2) Next, switch off your smartphone. Once done, boot it into the “ Download” mode by pressing and holding the Volume Down, Power and Home buttons simultaneously. Now your Samsung device will vibrate.

Once you have felt it, keep pressing the Volume Down and Home buttons (leave the Power button) and your device will boot into the Download mode. 3) Now you will see a “ Warning” message as shown below. Just press the “ Volume Up” key to continue. Advantages And Disadvantages Of Blender Software Pictures more. 4) Next, and extract it to a folder in your computer. Once done, click on “ Odin3.exe” to launch its window.

5) Now connect your smartphone to the computer using the original USB data cable. If you have installed the USB drivers of your device properly in the Windows computer, Odin will automatically identify your device and will show a “ Added” message in the “ Log” section. 6) Next, click on the “ AP” button and select the “.tar.md5” file (from Step 1). 7) Once the Samsung firmware file is added, click on “ Start” button in “ Odin” to launch the flashing process.

8) Don’t do anything during the flashing process. Once it gets completed, you will see the green “ PASS” message as shown in the screenshot below. 9) Now unplug your device from the computer.

But when you try to boot your device normally, it will get into a boot loop. To fix this error, switch off your smartphone and boot into the “ Recovery” mode by pressing and holding the Volume Up, Power and Home buttons simultaneously. 10) Once your device boots into the recovery mode, click on “ Wipe data/factory reset“. Once done, click on “ Reboot System Now” as shown in the screenshot below.