Canon has revealed a new firmware update for the EOS 40D – version 1.1.1 – that’s now available for download. Disclaimer canon u.s.a.,inc. Makes no guarantees of any kind with regard to any programs, files, drivers or any other materials contained on or downloaded from this.

Generals Zero Hour Patch. Firmware update Version 1.1.1 incorporates the following fixes and improvements. • Fixes a malfunction that in rare occurrence causes a low battery indication to be displayed when using the EF 85mm F1.2L II USM lens. Depending on the battery check timing of the camera, the battery level displayed on the camera's LCD data panel may shows Battery will be exhausted soon or Battery must be recharged, even though the battery capacity is sufficient. • Fixes a malfunction that in rare occurrence causes an Err 06 Self Cleaning Sensor malfunction to appear on the camera's LCD monitor and LCD data panel, even when the Self Cleaning Sensor Unit is operating normally. This message may appear depending on the timing of when the camera is switch to the ON position.

• Fixes a malfunction that prevents correct colors from being printed when direct printing. RAW images captured using the camera's custom Picture Styles (Emerald, etc.), which have been downloaded from Canon's Web site and registered under User Def. 2 or User Def.

• Modifies the level of subject brightness that causes the AF-assist beam to fire when using an external Speedlite. • Enables an external flash connected to the camera's synchro terminal to fire even when the camera's built-in flash is popped up. Version 1.1.1 firmware is for EOS 40D cameras with firmware up to Version 1.1.0. If the camera's firmware is already Version 1.1.1, it is not necessary to update the firmware. Before downloading the firmware update, please be sure to read the entire contents of this page. Please download the compressed, self-extracting file that matches your computer's operating system.

Extract the contents of the downloaded file to create the firmware update file. Firmware update file File name: 40d00111.fir File size: 8,193,788 bytes How to Extract the Firmware Update File Windows Double-click the downloaded file.

Clicking [OK] will cause the file's contents to be extracted and the firmware update file to be created. Macintosh The downloaded file will automatically self-extract, creating the firmware update file.

In the case the downloaded file do not automatically self-extract, double-click the downloaded file. How to Confirm the File Size Windows Right-click the icon of the firmware update file and select the [Properties] command from the pop-up menu that appears. Macintosh Select the icon of the firmware update file, and then select the [Get Info] command from the [File] menu. There are two ways to install the firmware update: • To install from a CF card, follow the procedures outlined in, then bypass Step 4-1 and continue to Step 5. • To install directly from a compatible computer, bypass Step 3-1 and follow the procedures from Step 4-1 onward. (3-1) Copy the firmware update file to the CF card. >Rotate the Mode Dial to select mode (or one of the other modes in the creative zone).

Insert the CF card with the firmware into the camera. Turn the Power Switch, and then press the button to display the menu.

Rotate the Main Dial and the Quick Control Dial to select the 'Firmware Ver.x.x.x' item at the bottom of the 'Set-up 3 (Yellow)', and then press the button. The firmware update screen will appear. Turn the Quick Control Dial, select [OK], and then press the button.

Follow the procedure from onward. *If the firmware update screen does not appear on LCD monitor, the firmware update file may not have been properly copied to the CF card, so please try again starting from. (4-1) Connect the camera and the computer. Windows Xp Sp3 Bootable Iso Image.